Tab Cantilever

The input fields in the row Distance on this page will specify the vertical distance to the overlaying horizontal unit, these are for example:

Observation Case	Overlaying Horizontal Unit
Contact wire in the cross span	Lower cross-span wire
Messenger wire in the cross span	Upper cross-span wire
Contact wire in the Multi track cross span	Lower horizontal tube/cross-span wire
Messenger wire in the Multi track cross span	Upper horizontal tube
Contact wire in the cantilever	Height of registration arm

According to type of cantilever the register Cantilever offers different options. Not editable fields are shown grayed.

Options for cantilever: vertical clearance to the contact wire, length of the steady arm.
Options for cross spans (see also head span support): vertical clearance to the contact wire and messenger wire, length of the steady arm, designs.
Options for multi track cross arm 2: vertical clearance to the contact wire and messenger wire, length of the steady arm, designs, insulator of the dropper, Inclination of the insulator delimits (angle).

For the cross span and for the Multi track cross arm 2, the support point can be arranged as reference height support point. If another support point was the reference height support point before, it will loose this attribute, because only one reference height support point can exist at a cross span or Multi track cross arm 2. The heights of the other support points can be calculated by the reference height support point and the values from that dialog.